Still working, mainly painting

Still working away on Frostbite trying to get the boxes ready to go back in.  I've been painting away at the pieces for a week or so.  I've even comandeered the garage since I need room to lay the pieces out so they can dry.  Both Bluebell and Sonny are spending the nights outside. 

This past weekend I did manage to take out the paneling I put in on one bunkend that turned out to be the wrong paneling to use since it absorbs water and replaced it with beadboard. 

I took pictures and trust me, it looks pretty good.  I can't post the pictures yet as I had to take out the batteries in my camera and put them in a Wii remote for my daughter and her friend and the photos have not been downloaded from the camera yet.

I really need to pick up some batteries at the store!

I've identified two boxes that will need the front paneling replaced due to water damage.  Unfortunately, one of those boxes is the main galley box and it is the most complex of all of them.  I've taken pictures of the boxes before I took any of them apart and will make sure to capture this one from multiple angles as I will need to refer to them so I will know how to put this back together.

Another irritation is my stupid $15 jigsaw.  I used it to cut the beadboard for the replacement panels underneath the bunkend and the blade stopped moving.  The engine revs up but the blade doesn't move.  If I hold the jigsaw upside down, it starts going up and down again.

Hopefully, something just needs tightened or adjusted.

I'll have to have this thing working because I will need to cut square holes in the beadboard for the cabinet openings.

I also had a great idea about the cabinet doors.  There is a rounded edging around each of the doors.  I've already bought shiny new silver cabinet handles and hindges but I thought this edging would look cool if it was painted blue since everything else is glossy white.  I thought about taking an extra floor tile to Lowes and having them match the blue color and give me a small can of paint to paint the edging.

I'm pretty sure they can do this.  I saw this in a TV commercial so it must be true.

I'm going to try and get some batteries today so I can post some updated pictures of my progress.  I'm planning to spend the week painting and rebuilding the boxes and will strive to start putting the boxes back inside by the weekend.

Frostbite has got some new shoes!

On Saturday, we drove Frostbite to Dickson to Dickson County Oil and Tire so she could get some new tires and wheel bearings put on.  I had originally intended to do this myself.  However, I decided that a professional having a look at the wheel and axel would be a safer bet this first time.  I would be unable to notice serious problems like the axel being close to breaking in half or something like that so I opted to play it safe.

We had to leave her on Sat. because they did not have a mechanic working that day but they promised to get to it on Monday and we could pick her up anytime the next week.

I went to get her after work yesterday.  The owner told me that everything looked good (a big relief for me!) and that they put on new wheel bearings, gaskets, and some other jibber-jabber that I didn't commit to memory.

I went ahead and got three tires so the spare is brand new as well.

Better safe than sorry, I suppose.

I drove her home and, after a long series of cussing and steering wheel spinning, managed to get her backed up into our driveway.

Now, there is literally nothing preventing me from finishing her up.  I did more painting since last post as well and will include some pictures in my next entry.

Rebuilding the first box

OK, I chose a fairly simple box to start with. I will not be rebuilding every box. Fortunately, some are in good shape and those will only be repainted. A few, however, have some water damage and I will be replacing those pieces.

Here are some "before" pix of Box #1:

It doesn't look so bad at this angle.  The piece with the cutouts for the cabinet doors is in fine shape.

As you can see there is some water damage to the counter top.

I measured and sawed up the new top which was made much easier by the purchase of a couple of sawhorses.  I think it turned out pretty well.

A Masterpiece!

I then started painting the box pieces and will put them together once complete.  Right now, I'm hoping I can reinstall the boxes one at a time back in Frostbite.  That way I'll have a greater chance of remembering how they all fit together.

My daughter helped me paint a bit.  Notice that Boys and Girls Club T-shirt she is wearing?  Well, that, as my wife later informed me, is most definately NOT a shirt for painting.

It is now, though.

They all need another coat of paint which I'll have to do later this week.  Today it is raining.  I'd like to put on a coat or two of clear coat on the outside facing parts.  I bought a small can but wish I had gotten a few cans of the spray stuff.  That would be easier. 

No, my blog is not broken

I realize that this past month my blog has not seen a lot of action. This correctly reflects the fact that there has not been a lot of action on Frostbite last month either. I won't bore you with all the excuses I have collected which include sickness, wife's surgery, floods, rain, lack of $, etc. I can say, however, that I now have the funds and time necessary to complete Frostbite.

First, I'm happy to report that I ordered an air conditioner for Frostbite yesterday. I chose this one:

EdgeStar Extreme Cool 12,000 BTU Portable Air Conditioner and Heater

I spent a large amount of time shopping online trying to pick out the just the right AC.  I was trying to match several options such as size, BTU, and whether or not it was also a heater.  I discovered that my initial dream to permanently install an AC cannot be realized.

First, the unit had to be short, under 25in.  There are a few that were short enough but I then realized that the short ones were also deeper, I needed it to be about 21".  So the short ones would fit inside the cabnets ok but I would not have enough room to vent the air which, on those units anyway, came out of the back of the unit.  Also, these units were a good bit more expensive $100+.

I finally resigned myself to NOT permanently installing the unit and instead will place it on the cabinet next to the sink.  The exhaust hoses will be run through the cabinet top and out the floor of Frostbite. 

This will be a bit easier anyway since I will not have to do as much customization of the boxes except for a hole to run the exhaust hose through.

I went ahead and purchased the 2 year extended warranty ($40) and also what they call a "turtleneck" which is an insulation sleeve that covers the exhaust hose.  I have read in numerous places that the exhaust hose gets really hot and can be counter productive to the AC trying to cool the inside.

I also intend to make reflectix shields for the bunk end canvas tops which, from what I've read, contributes greatly to keeping a popup cool.  I have found instructions for making these out of the silver safety blankets you find in first aid kits.

The AC I bought was far cheaper than equivalent ACs at walmart, lowes, best buy etc. and had a better warranty so I feel good about the purchase.  The difference between the AC and the AC with the heater was only $20 so I opted to get the one with a heater which makes one less appliance to tote around in spring and fall both might be needed.

I also made a supply run to Lowes to get what will hopefully be the last of the building supplies I need to finish the inside. 

Next up: rebuilding the first box